LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Suspension System - Except Coupe) >> Front Suspension >> Stabilizer Bar >> Removal >> Removal - Stabilizer Bar >> Stabilizer Bar Inspection

Stabilizer Bar Inspection

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Inspect for broken or distorted stabilizer bar bushings, clamps and attaching links. If stabilizer bar to front crossmember bushing replacement is required, bushing can be removed using the stabilizer bar bushing removal procedure in REMOVAL - STABILIZER BAR BUSHING (FRONT)  and INSTALLATION - STABILIZER BAR BUSHING  .

If inspection determines that replacement of a stabilizer bar to lower control arm attachment link is required, replace the link before installing stabilizer bar.

scientia non olet · About LEMON Manuals