LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Suspension System - Except Coupe) >> Front Suspension >> Stabilizer Bar >> Installation >> Installation - Stabilizer Bar Bushing

Installation - Stabilizer Bar Bushing

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install new stabilizer bar bushings on the stabilizer bar. Bushings must be installed on sway bar with slit in bushing facing front of vehicle when sway bar is installed. 
  2. Install bushing retainers back on stabilizer bar bushings.
scientia non olet · About LEMON Manuals