LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Cruise Control Systems - Coupe) >> Auto-Cruise Control System Diagnosis >> Symptom Chart

Symptom Chart

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM CHART

SYMPTOMS INSPECTION PROCEDURE NO.
Communication with scan tool MB991502 is not possible. Communication with all systems is not possible. 2.4L Engine Refer to INSPECTION PROCEDURE 1: COMMUNICATION WITH SCAN TOOL IS NOT POSSIBLE. (COMMUNICATION WITH ALL SYSTEMS IS NOT POSSIBLE.)
3.0L Engine Refer to INSPECTION PROCEDURE 1: COMMUNICATION WITH SCAN TOOL IS NOT POSSIBLE. (COMMUNICATION WITH ALL SYSTEMS IS NOT POSSIBLE.)
Communication with auto-cruise control-ECU only is not possible. 1 
Auto-cruise control is not cancelled. When brake pedal is depressed. 2 
When clutch pedal is depressed. < M/T > 3 
When selector lever is moved to "N" range. < A/T > 4 
When "CANCEL" switch is turned ON. 5 
Auto-cruise control cannot be set. 6 
Hunting (repeated acceleration and deceleration) occurs at the set vehicle speed. < M/T > 7 
Hunting (repeated acceleration and deceleration) occurs at the set vehicle speed. < A/T > 8 
Auto-cruise control indicator light inside combination meter does not illuminate. (However, auto-cruise control is normal). 9