LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Lubrication >> Diagnosis & Testing >> Checking Engine Oil Pressure

Checking Engine Oil Pressure

  1. Remove the oil pressure switch. See REMOVAL .
  2. Install oil pressure test gauge assembly, Special Tools C-3292 with 8406 adaptor.
  3. Start engine and monitor gauge readings.
    CAUTION: If oil pressure is 0 at idle, Do Not Run engine at 3000 RPM.
  4. Oil Pressure (engine at operating temperature): Curb Idle 34.5 kPa (5 psi) minimum 3000 RPM 300-724 kPa (45-105 psi).
  5. If oil pressure is 0 at idle. Shut off engine, check for pressure relief valve stuck open or a clogged oil pickup screen.
  6. Install oil pressure switch after testing is completed. See INSTALLATION  under OIL PRESSURE SWITCH.
scientia non olet · About LEMON Manuals