LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Lubrication >> Oil Pressure Switch >> Description >> Installation

Oil Pressure Switch: Description: Installation

  1. Apply Mopar® Thread Sealant to the switch threads.
  2. Install oil pressure switch.
  3. Connect electrical connector.
  4. Install oil pressure switch heat shield.
  5. Lower vehicle.
  6. Start engine and check for leaks.
  7. Check engine oil level and adjust as necessary.
scientia non olet · About LEMON Manuals