LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine - VIN U >> Lubrication >> Oil Pressure Switch >> Description >> Removal

Oil Pressure Switch: Description: Removal

  1. Raise vehicle on hoist.
  2. Remove heat shield that covers oil pressure switch.
  3. Disconnect oil pressure switch electrical connector.
  4. Position an oil collecting container under switch location.
  5. Remove switch by unscrewing from the engine block.
scientia non olet · About LEMON Manuals