LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Trax ACTIV >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Trim Plate Applique Replacement - Right Side (UDC) >> Installation Procedure

Installation Procedure

  1. GM5914637Courtesy of GENERAL MOTORS COMPANY

    {If equipped} Install the ignition and start switch:

    1. Ignition and Start Switch (1) - Install
    2. Secure the retaining tabs.
  2. GM6171231Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  3. Instrument Panel Trim Plate Applique - Right Side (1) - Install
  4. GM6171230Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Instrument Panel Trim Plate Applique Bolt (1) - Install and tighten [4x] - Fastener Specifications 

  5. GM5914629Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  6. Heater and Air Conditioning User Interface Control (2) - Install
  7. Heater and Air Conditioning User Interface Control Bolt (1) - Install and tighten [2x] - Fastener Specifications
  8. GM5908245Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  9. Instrument Panel Center Trim Plate Applique (1) - Install
  10. GM5912123Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Trim Plate Applique - Left Side (2) - Install

  11. Instrument Panel Trim Plate Applique Bolt (1) - Install and tighten - Fastener Specifications 
  12. GM5910455Courtesy of GENERAL MOTORS COMPANY

    Secure the instrument panel steering column upper trim cover (1) to the instrument panel steering column lower trim cover in the opposite direction of the arrow.

  13. GM6174054Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  14. Instrument Cluster (1) - Install
  15. Secure the retaining tab.
  16. GM6174053Courtesy of GENERAL MOTORS COMPANY

    Instrument Cluster Bolt (1) - Install and tighten [4x] - Fastener Specifications

  17. GM6166471Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Bolt Cover - Left Side (1) - Install

  18. GM6171232Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Bolt Cover - Right Side (1) - Install

  19. GM5910807Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Instrument Cluster Hood (2) - Install

  20. Instrument Panel Trim Plate Strap Bolt (1) - Install and tighten [4x] - Fastener Specifications 
  21. GM6166469Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Cluster Trim Plate Applique (1) - Install

  22. GM5910805Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Cluster Trim Plate (1) - Install

  23. GM5907920Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  24. Instrument Panel Switch Trim Plate (1) - Install
  25. GM5907919Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Switch Trim Plate Bolt (1) - Install and tighten - Fastener Specifications 

  26. GM5907917Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Knee Bolster (1) - Install

  27. GM5907916Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Knee Bolster Bolt (1) - Install and tighten [3x] - Fastener Specifications 

  28. GM5661048Courtesy of GENERAL MOTORS COMPANY

    Hood Primary Latch Release Cable Handle (1) @ Instrument Panel Knee Bolster - Install

  29. GM5907912Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Outer Trim Cover - Left Side (1) - Install

scientia non olet · About LEMON Manuals