Installation Procedure
Instrument Panel Compartment (1) - Install
- CAUTION:
Refer to Fastener Caution .
Instrument Panel Compartment Bolt (1) - Install and tighten [12x] - Fastener Specifications
{With K4C} Instrument Panel Compartment Air Duct (1) - Install
{With K4C} Connect the electrical connector.
Front Floor Console Stowage Tray (1) - Install
Front Floor Console Storage Tray Bolt (1) - Install and tighten [2x] - Fastener Specifications
Front Floor Console (1) - Install - Front Floor Console Removal and Installation
Connect the electrical connectors.
- Instrument Panel Accessory Bezel (1) - Install
Instrument Panel Lower Trim Panel Insulator (3) - Install
- Instrument Panel Lower Insulator Retainer (1) - Install [2x]
- Instrument Panel Lower Insulator Bolt (2) - Install and tighten - Fastener Specifications
Instrument Panel Compartment Door (1) - Install
Instrument Panel Compartment Door (2) @ Instrument Panel Compartment Door Dampener (1) - Connect
Instrument Panel Outer Air Outlet - Right Side (2) - Install
- Instrument Panel Outer Air Outlet Bolt (1) - Install and tighten [2x] - Fastener Specifications
Instrument Panel Outer Trim Cover - Right Side (1) - Install
Connect the electrical connector.
- Instrument Panel Trim Plate Applique - Right Side (1) - Install
Instrument Panel Trim Plate Applique Bolt (1) - Install and tighten [4x] - Fastener Specifications
Connect the electrical connector.
- Heater and Air Conditioning User Interface Control (2) - Install
- Heater and Air Conditioning User Interface Control Bolt (1) - Install and tighten [2x] - Fastener Specifications
Connect the electrical connector.
- Instrument Panel Center Trim Plate Applique (1) - Install
Instrument Panel Trim Plate Applique - Left Side (2) - Install
- Instrument Panel Trim Plate Applique Bolt (1) - Install and tighten - Fastener Specifications
Secure the instrument panel steering column upper trim cover (1) to the instrument panel steering column lower trim cover in the opposite direction of the arrow.
Connect the electrical connector.
- Instrument Cluster (1) - Install
- Secure the retaining tab.
Instrument Cluster Bolt (1) - Install and tighten [4x] - Fastener Specifications
Instrument Panel Bolt Cover - Left Side (1) - Install
Instrument Panel Bolt Cover - Right Side (1) - Install
Instrument Panel Instrument Cluster Hood (2) - Install
- Instrument Panel Trim Plate Strap Bolt (1) - Install and tighten [4x] - Fastener Specifications
Instrument Panel Cluster Trim Plate Applique (1) - Install
Instrument Panel Cluster Trim Plate (1) - Install
Connect the electrical connector.
- Instrument Panel Switch Trim Plate (1) - Install
Instrument Panel Switch Trim Plate Bolt (1) - Install and tighten - Fastener Specifications
Instrument Panel Knee Bolster (1) - Install
Instrument Panel Knee Bolster Bolt (1) - Install and tighten [3x] - Fastener Specifications
Hood Primary Latch Release Cable Handle (1) @ Instrument Panel Knee Bolster - Install
Instrument Panel Outer Trim Cover - Left Side (1) - Install