No Drive in Drive Range
WARNING: This page is about a different variant/trim than selected.
| Checks | Action |
|---|---|
| Input Shaft on the Forward Clutch Assembly (106) | Inspect for damage, wear or misalignment in the case. Replace the forward clutch housing assembly (302). Forward Clutch Assembly Disassemble |
| Reverse Sun Gear (308) and Reverse Sun Gear Thrust Bearing (307) | Inspect gear for wear. Inspect bearing for damage or wear. Forward Clutch Assembly Disassemble |
| Front Differential Carrier Assembly (23) | Inspect for damage. Replace the front differential carrier assembly (23). Front Differential Carrier Removal |
| Front Differential Drive Pinion Gear Assembly (8) | Inspect for broken or damaged teeth. Front Differential Drive Pinion Gear with Transfer Gear Removal |
| Forward Clutch Housing Fluid Seal Ring (160, 161) | Inspect for cut or damage - causing leaking past the seal. Replace the seals (160, 161). Transmission Fluid Pump Disassemble |
| Pump Drive Sprocket (150) | Inspect for worn or broken teeth - causing loss of hydraulic power from drive link failure. Replace the pump drive sprocket (150). Transmission Fluid Pump Disassemble |
| Pump Driven Sprocket (192) | Inspect for worn or broken teeth - causing loss of hydraulic power from drive link failure. Replace the pump driven sprocket (192). Transmission Fluid Pump Disassemble |
| Drive Link Assembly (151) | Inspect for stretched, worn or damaged chain links. Replace the drive link assembly (151). Transmission Fluid Pump Disassemble |
| Pinion Gear and/or Transfer Gear Teeth on the Front Differential Drive Pinion Gear Assembly (8) | Inspect for broken or damaged teeth. Replace the front differential drive pinion gear assembly (8). Front Differential Drive Pinion Gear with Transfer Gear Removal |
| Forward Clutch Apply Plate (310) | Inspect for wear, broken splines or damage. Replace the forward clutch backing plate (310). Forward Clutch Assembly Disassemble |
| Retaining Ring (306, 314) for the Forward Clutch | Inspect for damage, looseness, or not holding. Replace the retaining ring (306, 314). Forward Clutch Assembly Disassemble |
| Forward Clutch Plate Assemblies (309, 311, 312) | Inspect for worn splines or friction material. Replace the forward clutch plate assemblies (309, 311, 312). Forward Clutch Assembly Disassemble |
| Forward Clutch Piston Assembly (303), Spring (304) and Dam Assembly (305) | Inspect for cut or rolled seals. Replace the forward clutch piston assembly (303), spring (304) and dam assembly (305). Forward Clutch Assembly Disassemble |
| Transmission Fluid Pump Assembly (104) | Inspect for internal damage - causing low or no pressure at the discharge port. Repair or replace the transmission fluid pump assembly (104). Transmission Fluid Pump Disassemble |
| Fluid Filter Assembly (181) | Inspect for clog, damage, loose or improper sealing. Replace the fluid filter assembly (181). Transmission Fluid Pump Disassemble |
| Torque Converter (16) | Inspect for:
Torque Converter Removal |
| Fluid Filter Assembly (1) | Inspect for clog, damage, loose or improper scaling. Replace fluid filter assembly (1). Automatic Transmission Fluid Filter Removal |
| Pump Driven Sprocket Retaining Ring (193) | Inspect for loose, damaged or ring not holding. Replace the retaining ring (193). Transmission Fluid Pump Disassemble |
| Pressure Regulator Valve Train | Inspect for:
Control Valve Body Cleaning and Inspection |
| Manual Valve (234) | Inspect for wear, sticking or binding. Control Valve Body Cleaning and Inspection |
| Control Valve Body (200) | Inspect for porosity, damage, or contamination with debris. Replace or flush the control valve body (200). Control Valve Body Cleaning and Inspection |