Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Heater Water Auxiliary Pump Bracket (2) @ Heater Coolant Pump - Install

CAUTION:

Refer to Fastener Caution .

Heater Coolant Pump Bracket Bolt (1) @ Heater Coolant Pump - Install
Engine Coolant Heater Pump Bracket Nut (3) - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Heater Coolant Pump (2) - Install
Heater Coolant Pump Bracket Bolt (1) @ Transmission - Install and tighten 9 N.m (80 lb in)
Electrical Connector @ Heater Coolant Pump - Connect
Courtesy of GENERAL MOTORS COMPANY

Engine Wiring Harness Retainer (1) @ Heater Water Auxiliary Pump Bracket - Install
High Voltage Air Conditioning Compressor Module Cable Retainer (2) @ Heater Water Auxiliary Pump Bracket - Install
Courtesy of GENERAL MOTORS COMPANY

Heater Coolant Pump Hose - Outlet (2) @ Heater Coolant Pump - Install - Heater Coolant Pump Hose Replacement (Inlet) , or Heater Coolant Pump Hose Replacement (Outlet) , or Heater Coolant Pump Hose Replacement (Pump Inlet LKN) , or Heater Coolant Pump Hose Replacement (Pump Outlet LKN)
Courtesy of GENERAL MOTORS COMPANY

Heater Coolant Pump Hose - Inlet (2) @ Heater Coolant Pump - Install - Heater Coolant Pump Hose Replacement (Inlet) , or Heater Coolant Pump Hose Replacement (Outlet) , or Heater Coolant Pump Hose Replacement (Pump Inlet LKN) , or Heater Coolant Pump Hose Replacement (Pump Outlet LKN)
Air Cleaner Outlet Duct - Install - Air Cleaner Outlet Duct Replacement
Courtesy of GENERAL MOTORS COMPANY

Intake Manifold Cover (1) - Install - Intake Manifold Cover Replacement
Enable the high voltage system. High Voltage Enabling
Fill the cooling system. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static)
Start the engine and check for coolant leaks.