Heater Coolant Pump Hose Replacement (Inlet)

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Drain the cooling system. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static) Heater Outlet Hose @ Heater Coolant Pump HoseRemove - Heater Outlet Hose Replacement (LFV) , or Heater Outlet Hose Replacement (LTG) , or Heater Outlet Hose Replacement (LKN)
1	Heater Coolant Pump Hose Clamp Procedure Hose Clamp Replacement Guidelines - Spring Type
2	Heater Coolant Pump Hose Fastener CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
3	Heater Coolant Pump Hose Procedure Fill the cooling system to the proper level. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static) Start the engine and check for coolant leaks.