Installation Procedure
With the aid of an assistant, position the headliner trim panel assembly (2)into the vehicle through the door opening.
- Connect the electrical connectors.
- Tape any unused connectors to the headlining with a high adhesive tape.
- Install the [9x]headliner trim panel retainers. (1)
Install the middle row left side rear seat retractor side belt (5). Rear Seat Retractor Side Belt Replacement (Back Row) , or Rear Seat Retractor Side Belt Replacement (Middle Rows - Left Side) , or Rear Seat Retractor Side Belt Replacement (Middle Rows - Right Side) , or Rear Seat Retractor Side Belt Replacement (2nd Row - Right Side)
Install the middle row right side rear seat retractor side belt (5). Rear Seat Retractor Side Belt Replacement (Back Row) , or Rear Seat Retractor Side Belt Replacement (Middle Rows - Left Side) , or Rear Seat Retractor Side Belt Replacement (Middle Rows - Right Side) , or Rear Seat Retractor Side Belt Replacement (2nd Row - Right Side)
{ If equipped }Roof Side Rail Garnish Molding - Right Side(1) - Install - Roof Side Rail Garnish Molding Replacement - Right Side
{ If equipped }Roof Side Rail Garnish Molding - Left Side(1) - Install - Roof Side Rail Garnish Molding Replacement - Left Side
Back Body Opening Garnish Molding (1) - Install - Back Body Opening Garnish Molding Replacement
Body Side Rear Garnish Molding (3) - Install - Body Side Rear Garnish Molding Replacement
Headlining Front Trim Panel(3) - Install - Headlining Front Trim Panel Replacement
- Enable the SIR System. SIR Disabling and Enabling