LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Interior Trim And Paneling) >> Repair Instructions >> Body Side Rear Garnish Molding Replacement

Body Side Rear Garnish Molding Replacement

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
GM4859228Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Disable the SIR system. SIR Disabling and Enabling
1 Body Side Garnish Molding Cap [2x]
Procedure 
Use a flat bladed plastic trim tool.
2 Body Side Garnish Molding Bolt [2x]
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in) N.m
3 Body Side Rear Garnish Molding

Procedure

  1. Use a flat bladed plastic trim tool.
  2. Grasp and gently pull inward in order to disengage the retaining clips.
  3. Enable the SIR System. SIR Disabling and Enabling
scientia non olet · About LEMON Manuals