Roof Side Rail Garnish Molding Replacement - Right Side

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Center Pillar Upper Garnish Molding Replacement - Right Side
1	Roof Side Rail Garnish Molding - Right Side Procedure Use a flat bladed plastic trim tool. Pull downward to disengage the retaining clips. Disconnect the tether clip from the upper roof rail the tether clip MUST be replaced every time the roof side rail garnish molding is removed.

Callout

Component Name

Preliminary Procedure
Center Pillar Upper Garnish Molding Replacement - Right Side

Roof Side Rail Garnish Molding - Right Side

Procedure

Use a flat bladed plastic trim tool.
Pull downward to disengage the retaining clips.
Disconnect the tether clip from the upper roof rail the tether clip MUST be replaced every time the roof side rail garnish molding is removed.