LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Transmission - TREMEC 6-Speed (M13 MJK Mm6 MH3)) >> Repair Instructions - Off Vehicle >> Counter Gear Shaft Assemble (MJK, MH3, or MM6)

Counter Gear Shaft Assemble (MJK, MH3, or MM6)

WARNING: This page is about a different variant/trim than selected.

Special Tools 

J 38205-1  Press Tube

For equivalent regional tools, refer to Special Tools (MJK, MH3, or MM6) .

  1. GM2102289Courtesy of GENERAL MOTORS COMPANY

    Install a NEW countershaft rear bearing, using the J 38205-1  press tube (1) and a rubber mallet.

  2. GM1748680Courtesy of GENERAL MOTORS COMPANY

    Install a NEW countershaft front bearing, using the J 38205-1  press tube and a hydraulic press.

scientia non olet · About LEMON Manuals