Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Drive Belt Routing
Courtesy of GENERAL MOTORS COMPANY

Generator and Air Conditioning Compressor Belt (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Tension the drive belt tensioner (1).
1. Install a wrench (3) to the drive belt tensioner.
2. Push the drive belt tensioner in arrow direction until the suitable fixing pin (2) can be removed from the bore.
3. Release the drive belt tensioner.
Front Compartment Insulator - Install - Front Compartment Insulator Replacement