LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze Premier, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - On Vehicle >> Engine Mount Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM4199158Courtesy of GENERAL MOTORS COMPANY

    Engine Mount (4) - Install

    2. CAUTION:

    Fastener Caution

  2. Install the 3 NEW engine mount to body bolts (1, 3) and tighten in two passes:
      CAUTION:

      Torque-to-Yield Fastener Caution

    1. First Pass: 100 N.m (74 lb ft)
    2. Final Pass: 60 - 75 degrees - EN-45059  meter
  3. Install the 2 NEW engine mount to engine mount bracket bolts (2) and tighten in two passes:
      CAUTION:

      Torque-to-Yield Fastener Caution

    1. First Pass: 100 N.m (74 lb ft)
    2. Final Pass: 60 - 75 degrees - EN-45059  meter
  4. GM4199157Courtesy of GENERAL MOTORS COMPANY

    Remove the engine lifter (1) from the right engine lift bracket.

  5. Air Cleaner Assembly Replacement - Install
  6. Engine Sight Shield Replacement  - Install
scientia non olet · About LEMON Manuals