Timing Chain Tensioner Removal
WARNING: This page is about a different variant/trim than selected.
Special Tools
EN-50513
Fixing Pin
For equivalent regional tools, refer to Special Tools .
 Courtesy of GENERAL MOTORS COMPANY
|
Tension the timing chain tensioner (1) in arrow direction.
- Install the EN-50513
pin (2).
 Courtesy of GENERAL MOTORS COMPANY
|
Remove the 2 timing chain tensioner bolts (3).
NOTE:
If the timing chain tensioner reused, do not remove the EN-50513
pin (2).
- Remove the timing chain tensioner (1).