Special Tools
WARNING: This page is about a different variant/trim than selected.
| Illustration | Tool Number/Description |
|---|---|
| BO-42220 J-42220 Universal Leak Detection Lamp |
|
| CH-51034 Guide Pins |
|
| DT-523-1 KM-523-1 Handle |
|
| GE-7872 J-7872 Magnetic Base Dial Indicator |
|
| EN-652 KM-652 Flywheel Holder |
|
| EN-840 KM-840 EN-46116 83 94 157 Pliers Remover |
|
| EN-956-1 KM-956-1 Extension |
|
| EN-958 KM-958 Valve Stem Seal Installer |
|
| EN-8062 J8062 Valve Spring Compressor |
|
| EN-43963 J-43963 Valve Spring Compressor Adapter |
|
| EN-21867-850 J-21867-850 EN-6106 Oil Pressure Gage Adapter |
|
| EN-6624 KM-6624 J-36825-A Seal Remover |
|
| EN-8087 J-8087 Cylinder Bore Gauge |
|
| EN-26999 J-26999 Compression Gauge |
|
| EN-35667-A J-35667-A Cylinder Leakdown Tester |
|
| EN-45059-A J-45059-A Angle Meter |
|
| EN-46116 Valve Stem Seal Remover |
|
| EN-47632 Injector Cleaning Tool |
|
| EN-49075 Valve Spring Compressor Adapter |
|
| EN-49271-200 Adapter Engine Stand |
|
| EN-49979 Retainer Shock Mount Crankshaft along with EN-49979-100 |
|
| EN-49979-100 Decoupler Holder Pins along with EN-49979 |
|
| EN-50513 EN-52234 Locking pin |
|
| EN-50173 Universal Valve Spring Compressor |
|
| EN-50509 Fixing Tool |
|
| EN-50885 High Pressure Pump Locking Tool |
|
| EN-51007 J-28467-B Engine Support Fixture |
|
| EN-51110 Compression Tester Adapter |
|
| EN-51140 Crankshaft Fixing Tool |
|
| EN-51141 Intermediate Drive Gear Fixing Tool |
|
| EN-51142 Oil Pump Sprocket Unit Holding Tool |
|
| EN-51143 Camshaft Fixing Tool |
|
| EN-51144 Crankshaft Seal Installer |
|
| EN-51144-100 Crankshaft Seal Installer |
|
| EN-51145 Crankshaft Seal Installer |
|
| EN-51146-1-3 Sliding Hammer |
|
| EN-51187 Injector Remover |
|
| EN-51188 Camshaft Sprocket Support |
|
| EN-51878 Compression and Cylinder Leakdown Adapter Kit |
|
| GE-328-B KM-328-B J-6215-1B Sliding Hammer |
|
| GE-498-B KM-498-B CH-48027 J-21867-A 83 92 516 or 87 91 600 Oil Pressure Gauge |
|
| GE-571-B MKM-571-B J-8001 Dial Gauge |