Engine Mount Bracket Installation

Special Tools 

EN-45059  Angle Meter

Equivalent regional tools: Special Tools 

Courtesy of GENERAL MOTORS COMPANY

1. Engine Mount Bracket (2) - Install
CAUTION:

Fastener Caution

2. Engine Mount Bracket Bolt (1) - Install NEW [4x] - Hand tighten
CAUTION:

Torque-to-Yield Fastener Caution

3. Engine Mount Bracket Bolt (1) - Tighten in sequence [4x]
   1. First Pass: 58 N.m (43 lb ft)
   2. Final Pass: 60 - 75 degrees - Use the special tool: EN-45059  Angle Meter