LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical - 1.4L (LE2)) >> Repair Instructions - On Vehicle >> Turbocharger Oil Feed Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Air Conditioning Compressor Bracket Replacement (LUV)Air Conditioning Compressor Bracket Replacement (2H0)Air Conditioning Compressor Bracket Replacement (LE2) - Remove
  2. GM3979896

    Remove the turbocharger oil feed pipe bolt (1).

  3. Remove and DISCARD the 2 turbocharger oil feed pipe gaskets (2).
  4. Raise and support the vehicle. Lifting and Jacking the Vehicle
    5. NOTE:

    It is necessary to remove the catalytic converter to gain more space for the turbocharger oil feed pipe removal.

  6. GM3764371

    Remove the turbocharger oil feed pipe clip (1).

  7. Remove and DISCARD the turbocharger oil feed pipe retainer (3).
  8. Remove the turbocharger oil feed pipe (2).
  9. GM3764374
    NOTE:

    The turbocharger oil feed pipe fitting is not reusable.

    Remove and DISCARD the turbocharger oil feed pipe fitting (2).

  10. Remove and DISCARD the turbocharger oil feed pipe fitting gasket (1).
scientia non olet · About LEMON Manuals