LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Mechanical - 5.3L (L83) Or 6.2L (L86) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Front Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban, and 2018 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper oil pan. Refer to Oil Pan Replacement .
  2. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
  3. Remove the vacuum pump. Refer to Vacuum Pump Replacement .
  4. Remove the engine coolant manifold. Refer to Engine Coolant Manifold Replacement (L83, L86) .
  5. Remove the A/C compressor. Refer to Air Conditioning Compressor Replacement (L83 L86) .
    6. Fig 1: Electrical Connectors
    GM3277662Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the electrical connectors (1).
    7. Fig 2: Front Cover And Bolts
    GM3424726Courtesy of GENERAL MOTORS COMPANY
  7. Remove the front cover bolts (1 and 2).
  8. Remove front cover (3).
  9. Ensure to clean and inspect the engine front cover. Refer to Engine Front Cover Cleaning and Inspection .
scientia non olet · About LEMON Manuals