LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Cushion Cover and Pad Replacement (60%)

Rear Seat Back Cushion Cover and Pad Replacement (60%)

Fig 1: Rear Seat Back Cushion Cover and Pad
GM1685292Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Rear Seat Removal and Installation (60/40 Bench) 
  2. Rear Seat Head Restraint Guide Replacement 
  3. Rear Seat Armrest Replacement (60/40 Bench) 
  4. Rear Seat Center Buckle Side Belt Replacement
  5. Rear Seat Belt Opening Bezel Replacement 
1 Rear Seat Head Restraint
2 Rear Seat Head Restraint Guide
3 Rear Seat Back Cushion Cover

Procedure

  1. Disconnect the seat back cushion cover j-channel.
  2. Remove the four push in retainers holding the cover to the seat back frame.
  3. Disconnect the electrical connector if equipped with heated seat.
  4. Pull the seat back cushion cover away from the seat cushion pad to disengage the hook and loop fasteners.
4 Rear Seat Back Cushion Pad
scientia non olet · About LEMON Manuals