LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Belt Opening Bezel Replacement

Rear Seat Belt Opening Bezel Replacement

Fig 1: Rear Seat Belt Opening Bezel
GM3654191Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Rear Seat Belt Opening Bezel

Procedure

  1. Use a suitable flat-bladed tool to release the bezel from the rear seat cushion cover and pad and then slide it out rearwards to remove.
  2. Route the rear seat retractor belt through the opening in the rear seat back shoulder opening cover.
scientia non olet · About LEMON Manuals