LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Controls And Fuel - 1.4L (LV7) - Repair Instructions) >> Repair Instructions >> Engine Oil Pressure Sensor Replacement (LV7) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling .
  2. Reposition the radiator surge tank. Refer to Radiator Surge Tank Replacement .
  3. Remove the engine control module. Refer to the Engine Control Module Replacement .
  4. Remove the front heater outlet hose (1). Refer to Heater Outlet Hose Replacement .
    Fig 1: Front Heater Outlet Hose
    GM4281797Courtesy of GENERAL MOTORS COMPANY
  5. Remove the heater inlet hose assembly (2). Refer to Heater Inlet Hose Replacement .
  6. Remove the transmission mount bracket bolt (1) and transmission mount bracket (2).
    Fig 2: Transmission Mount Bracket Bolt
    GM4230553Courtesy of GENERAL MOTORS COMPANY
  7. Disconnect the engine oil pressure sensor connector (1).
    Fig 3: Engine Oil Pressure Sensor Connector
    GM4230554Courtesy of GENERAL MOTORS COMPANY
  8. Remove the engine oil pressure sensor (2).
scientia non olet · About LEMON Manuals