LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Cooling System) >> Repair Instructions >> Thermostat Bypass Pipe Replacement (LV7) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling .
  2. Reposition the radiator surge tank. Refer to Radiator Surge Tank Replacement .
  3. Remove the catalytic converter heat shield. Refer to Catalytic Converter Heat Shield Replacement (LV7) .
  4. Remove the 2 thermostat bypass pipe bolts (2).
    Fig 1: Thermostat Bypass Pipe Gasket And Bolts
    GM4230582Courtesy of GENERAL MOTORS COMPANY
  5. Remove and DISCARD the thermostat bypass pipe gasket (1).
  6. Remove the clamp (2).
    Fig 2: Thermostat Bypass Pipe And Bolt
    GM4230581Courtesy of GENERAL MOTORS COMPANY
  7. Remove the thermostat bypass pipe bolt (1).
  8. Remove the thermostat bypass pipe (3).
scientia non olet · About LEMON Manuals