LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LTG)) >> Repair Instructions - On Vehicle >> Engine Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove Intake Manifold Cover - Intake Manifold Cover Replacement 
  2. Remove Air Cleaner Assembly -Air Cleaner Assembly Replacement
  3. Install Engine Support Fixture - Engine Support Fixture 
    4. Fig 1: Engine Mount Brace And Bolt
    GM4665470Courtesy of GENERAL MOTORS COMPANY
  4. Remove Engine Mount Brace Bolt (1) - [2x]
  5. Remove Engine Mount Brace (2) -
    6. Fig 2: Engine Mount Bolt
    GM4665529Courtesy of GENERAL MOTORS COMPANY
  6. Remove Engine Mount Bolt (1) - [2x]
    7. Fig 3: Engine Mount Bracket Bolts
    GM4665540Courtesy of GENERAL MOTORS COMPANY
  7. Remove Engine Mount Engine Side Bolt (1) and DISCARD [2x]
  8. Remove Engine Mount (2)
scientia non olet · About LEMON Manuals