Rear Seat Center Shoulder Belt Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Disable the SIR system. Refer to SIR Disabling and Enabling . Remove the rear floor panel carpet. Refer to Rear Floor Panel Carpet Replacement - Left Side , or Rear Floor Panel Carpet Replacement - Right Side . Bring the folding top to the third service position. Refer to Folding Top Positions Overview . Remove the rear seat belt intermediate guide. Refer to Rear Seat Belt Intermediate Guide Replacement . Remove the rear seat back cushion. Refer to Rear Seat Back Cushion Removal and Installation - Left Side , or Rear Seat Back Cushion Removal and Installation - Right Side . Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation .
1	Rear Seat Shoulder Belt Retractor Bracket Nut CAUTION: Refer to Fastener Caution . Tighten 45 N.m (33 lb ft)
2	Rear Seat Belt Buckle Bolt Tighten 45 N.m (33 lb ft)
3	Rear Seat Center Shoulder Belt Procedure Remove the shoulder belt through the body.