Rear Seat Cushion Removal and Installation

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
1	Seat Cushion Retainer (Qty: 2)
2	Rear Seat Cushion Procedure Pull up on the front of the seat cushion to disengage the retainers, and lift out of the vehicle. A high amount of upward force will be required. After removal of the retainers, the sheet metal will be slightly deformed outward. Use a small hammer to pound the sheet metal back to its original, flat appearance. When installing new plastic retainers on the front of the seat, ONLY seat the retainer to the first click, otherwise the insertion force into the sheet metal will be greatly increased.

Callout

Component Name

Seat Cushion Retainer (Qty: 2)

Rear Seat Cushion

Procedure

Pull up on the front of the seat cushion to disengage the retainers, and lift out of the vehicle. A high amount of upward force will be required.
After removal of the retainers, the sheet metal will be slightly deformed outward. Use a small hammer to pound the sheet metal back to its original, flat appearance.
When installing new plastic retainers on the front of the seat, ONLY seat the retainer to the first click, otherwise the insertion force into the sheet metal will be greatly increased.