LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Rear Seat Back Cushion Removal and Installation - Left Side

Rear Seat Back Cushion Removal and Installation - Left Side

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
GM2969185
Callout Component Name
Preliminary Procedures 
Remove the rear seat back side cushion pad. Refer to Rear Seat Back Side Pad Replacement .
1 Rear Seat Back Cushion Pivot Support

Procedure

  1. Fold the rear seat back cushion forward.
  2. Push in on the rear seat back cushion pivot support, and release from the bracket.
2 Rear Seat Back Cushion Replacement

Procedure

  1. Pull up on the outer side of the rear seat back cushion and remove the rear seat back cushion from the bracket and hinge.
  2. Transfer components as necessary.
scientia non olet · About LEMON Manuals