LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Rear Seat Inner Hinge Finish Cover Replacement

Rear Seat Inner Hinge Finish Cover Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
GM2969160
Callout Component Name

Preliminary Procedures

  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation .
  2. Remove the left and right rear seat back cushion. Refer to Rear Seat Back Cushion Removal and Installation - Left Side , and Rear Seat Back Cushion Removal and Installation - Right Side .
1 Rear Seat Inner Hinge Finish Cover

Procedure

  1. Unclip the left and right latch from the inner hinge finish cover.
  2. Remove the inner hinge finish cover in top direction.
scientia non olet · About LEMON Manuals