LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Front Seat Back Cover and Pad Replacement

Front Seat Back Cover and Pad Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
GM2191252
Callout Component Name

Preliminary Procedures

  1. Remove the driver or passenger seat. Refer to Driver or Passenger Seat Removal and Installation .
  2. Remove the front seat cushion side finish panel. Refer to Front Seat Cushion Side Finish Panel Replacement .
  3. Remove the driver or passenger seat inner recliner finish cover. Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement .
  4. Remove the driver or passenger seat head restraint. Refer to Driver or Passenger Seat Head Restraint Replacement .
1 Driver or Passenger Seat Back Cushion Cover
2 Driver or Passenger Seat Back Cushion Pad

Procedure

  1. Remove front seat back from front seat.
  2. Remove cushion cover and cushion pad from backrest frame.
  3. Remove cushion cover from cushion pad - 16 hog rings.
  4. Remove front seat back cushion heater.
scientia non olet · About LEMON Manuals