Driver or Passenger Seat Removal and Installation

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedure SIR Disabling and Enabling. Refer to SIR Disabling and Enabling .
1	Driver or Passenger Seat Fastener (Qty: 2) Procedure Clean the threads with appropriate thread chaser. Fasteners are microencapsulated. Install NEW driver or passenger seat bolts. DO NOT reuse the old bolts. Tighten 45 N.m (33 lb ft)
2	Front Seat Assembly NOTE: Seat structure with single speed option can NOT be (re)built to double speed option or its parts. Please make sure that all for this car released and applicable parts are in place and functioning. Procedure Disconnect the electrical connector. Transfer parts as necessary. After installing a new power seat, perform the seat learn procedure. Refer to Easy Entry Seat Learn Procedure .

Callout

Component Name

WARNING:

Refer to SIR Warning .

Preliminary Procedure SIR Disabling and Enabling. Refer to SIR Disabling and Enabling .

Driver or Passenger Seat Fastener (Qty: 2)

Procedure

Clean the threads with appropriate thread chaser.
Fasteners are microencapsulated. Install NEW driver or passenger seat bolts. DO NOT reuse the old bolts.

Tighten
45 N.m (33 lb ft)

Front Seat Assembly

NOTE:

Seat structure with single speed option can NOT be (re)built to double speed option or its parts.

Please make sure that all for this car released and applicable parts are in place and functioning.

Procedure

Disconnect the electrical connector.
Transfer parts as necessary.
After installing a new power seat, perform the seat learn procedure. Refer to Easy Entry Seat Learn Procedure .