Quarter Lower Rear Trim Panel Replacement

Preliminary Procedures

1. Remove the rear seat back cushion. Refer to Rear Seat Back Cushion Removal and Installation (Base)Rear Seat Back Cushion Removal and Installation (40 Percent Seat)Rear Seat Back Cushion Removal and Installation (60 Percent Seat) .
2. Remove the rear side door sill trim plate. Refer to Rear Side Door Sill Garnish Molding Replacement .
3. Remove the quarter window trim finish panel. Refer to Quarter Window Trim Finish Panel Replacement .
4. Remove the load floor trim panel. Refer to Load Floor Trim Panel Replacement .
5. Remove the liftgate sill garnish molding. Refer to Liftgate Sill Garnish Molding Replacement .

Procedure

1. Release the rear seat belt anchor bracket from the rear seat.
2. Use a flat-bladed plastic trim tool to release the quarter lower rear trim panel from the quarter inner panel.
3. Disconnect the electrical connectors.