Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Engine Coolant Temperature Sensor (2) - Install

Fig 1: Engine Coolant Temperature Sensor Retainer
Courtesy of GENERAL MOTORS COMPANY
Engine Coolant Temperature Sensor Retainer (1) - Install
Electrical Connector (1) - Connect

Fig 2: Electrical Connector
Courtesy of GENERAL MOTORS COMPANY
Connect the automatic transmission range selector lever cable (1) to the automatic transmission range selector lever cable lever and automatic transmission range selector lever cable bracket (2). Refer to Range Selector Lever Cable Replacement

Fig 3: Transmission Range Selector Lever Cable
Courtesy of GENERAL MOTORS COMPANY
Engine Coolant Air Bleed Hose (3) @ Water Outlet - Connect Engine Coolant Air Bleed Hose Replacement (LKN Radiator Surge Tank to Water Outlet to Exhaust Gas Recirculation Cooler Outlet Pipe)

Fig 4: Engine Coolant Air Bleed Hose
Courtesy of GENERAL MOTORS COMPANY
Fill the cooling system. Refer to Cooling System Draining and Filling (Static)Cooling System Draining and Filling (GE 47716)
Intake Manifold Cover - Install Intake Manifold Cover Replacement