Front Fender Replacement - Right Side

Fig 1: Front Fender - Right Side

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement . Remove the headlamp. Refer to Headlamp Replacement . Remove the front bumper fascia side bracket. Refer to Front Bumper Fascia Side Bracket Replacement Remove the wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Right Side . Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement . Remove the rocker panel molding. Refer to Rocker Panel Molding Replacement Remove the body side upper front applique. Refer to Body Side Upper Front Applique Replacement
1	Front Fender Bolt (Qty: 6) CAUTION: Refer to Fastener Caution . Tighten 7.5 N.m (66 lb in)
2	Front Fender

Callout

Component Name

Preliminary Procedure

Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
Remove the headlamp. Refer to Headlamp Replacement .
Remove the front bumper fascia side bracket. Refer to Front Bumper Fascia Side Bracket Replacement
Remove the wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Right Side .
Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
Remove the rocker panel molding. Refer to Rocker Panel Molding Replacement
Remove the body side upper front applique. Refer to Body Side Upper Front Applique Replacement

Front Fender Bolt (Qty: 6)

CAUTION:

Tighten
7.5 N.m (66 lb in)

Front Fender