LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Front Cover Replacement (LKW) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (LKW) .
  2. Remove the camshaft cover. Refer to Camshaft Cover Replacement (LKW) .
  3. Remove the engine mount (1). Refer to Engine Mount Replacement (LKW) .
    Fig 1: Engine Mount
    GM2813330Courtesy of GENERAL MOTORS COMPANY
  4. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement (Except North America)  and Crankshaft Balancer Replacement (North America) .
  5. Remove the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
  6. Remove the engine front cover bolts (2-6, 8).
    Fig 2: Engine Front Cover Bolts & Oil Seal
    GM2726758Courtesy of GENERAL MOTORS COMPANY
  7. Remove the engine front cover (1).
  8. Remove the front oil seal (7) with an appropriate tool.
scientia non olet · About LEMON Manuals