Installation Procedure
WARNING: This page is about a different variant/trim than selected.
- Install the air cleaner assembly (1).
- Clip in the water drain hose (2) to the air cleaner lower housing (1).
- Install the air cleaner outlet duct (1). Refer to Air Cleaner Outlet Duct Replacement .
- Install the secondary air injection pump inlet hose (4) to the air cleaner upper housing. Refer to Secondary Air Injection Pump Inlet Hose Replacement .
- Connect the mass airflow sensor/intake air temperature sensor wiring harness plug (2).
- Clip in the ECM wiring harness (3) the air cleaner housing.