LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LUZ) Diesel) >> Repair Instructions - On Vehicle >> Positive Crankcase Ventilation Heater Removal and Installation >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the positive crankcase ventilation heater (3) to the air cleaner outlet rear duct.
    Fig 1: Positive Crankcase Ventilation Heater Wiring Harness Plug
    GM3547177Courtesy of GENERAL MOTORS COMPANY
  2. Connect the positive crankcase ventilation heater wiring harness plug (1).
  3. Clip in the wiring harness retainer (2).
  4. Ensure that the positive crankcase ventilation heater gap (1) aligns to the air cleaner outlet rear duct lug (2).
    Fig 2: Positive Crankcase Ventilation Heater Gap
    GM2658426Courtesy of GENERAL MOTORS COMPANY
  5. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
scientia non olet · About LEMON Manuals