Crankshaft Sprocket Removal

Special Tools 

EN-46792  Crankshaft/Flywheel Holder

For equivalent regional tools, refer to Special Tools .

1. Install the EN-46792  holder (1) in order to hold the crankshaft.
   Fig 1: Holder

   Courtesy of GENERAL MOTORS COMPANY
2. Remove the crankshaft sprocket bolt (1).
   Fig 2: Crankshaft Sprocket

   Courtesy of GENERAL MOTORS COMPANY
   NOTE: The bolt has a left-hand thread.
3. Remove the crankshaft sprocket (2).