LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LUZ) Diesel) >> Diagnostic Information and Procedures >> Oil Pressure Diagnosis and Testing >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the engine oil cooler outlet hose. Refer to Engine Oil Cooler Outlet Hose Replacement (2.0L Diesel LUZ) .
  4. Disconnect the oil pressure sensor wiring harness plug.
  5. Remove the oil pressure sensor (1).
    Fig 1: Oil Pressure Sensor
    GM2512731Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals