LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions) >> Repair Instructions >> Throttle Body Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
  2. Remove the charge air cooler outlet air hose from the throttle body assembly. Refer to Charge Air Cooler Outlet Air Hose Replacement .
  3. Disconnect the throttle body wiring harness plug.
  4. Remove the 4 throttle body bolts (4).
    Fig 1: Engine Sight Shield Bracket And Throttle Body
    GM2968078Courtesy of GENERAL MOTORS COMPANY
  5. Remove the engine sight shield bracket (3).
  6. Remove the throttle body (2).
  7. Remove and DISCARD the throttle body gasket (1).