Installation Procedure

Install the parking brake cable (1) to the rear brake caliper.

Fig 1: Parking Brake Cable At Rear Brake Caliper
Courtesy of GENERAL MOTORS COMPANY
Clip in the parking brake cable (2).

Fig 2: Parking Brake Cable Casing Retainer Bolt
Courtesy of GENERAL MOTORS COMPANY
Install the parking brake cable casing retainer bolt (1) and tighten to 22 N.m (16 lb ft).
CAUTION: Refer to Fastener Caution .
Install the parking brake cable grommet (2).

Fig 3: Parking Brake Cable Clip
Courtesy of GENERAL MOTORS COMPANY
Install the parking brake cable clip (1).
Install the parking brake cable (2) to the parking brake cable bracket (3).

Fig 4: Parking Brake Cable And Parking Brake Cable Bracket
Courtesy of GENERAL MOTORS COMPANY
Install in the parking brake cable (2) to the parking brake lever (1).
Install the rear floor carpet (1).

Fig 5: Rear Floor Carpet
Courtesy of GENERAL MOTORS COMPANY
Install the center pillar lower garnish molding. Refer to Center Pillar Lower Garnish Molding Replacement .
Install the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation .
Install the front floor console. Refer to Front Floor Console Replacement .