LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Camaro Z/28 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 6.2L (L99 LS3 LSA) Or 7.0L (LS7) - Repair Instructions >> Repair Instructions >> Spark Plug Wire Replacement (LS7) >> Removal Procedure

Removal Procedure

  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (Left Side)Intake Manifold Cover Replacement (Right Side) .
    2. Fig 1: Identifying Ignition Coil & Spark Plug Wire
    GM1950746Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the spark plug wire (2) to the spark plug.
    • Twist each spark plug boot 1/2 turn.
    • Pull only on the boot in order to remove the wire from each spark plug.
  3. Disconnect the spark plug wire from the ignition coil (1).
    • Twist each spark plug boot 1/2 turn.
    • Pull only on the boot in order to remove the wire from the ignition coil.
scientia non olet · About LEMON Manuals