LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Sonic RS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 1.8L (LUW, LWE)) >> Diagnostic Information and Procedures >> Cylinder Leakage Test >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the pressure loss tester.
  2. Remove the connection piece from the spark plug thread.
  3. Put the vehicle in neutral.
  4. Insert the oil dipstick.
  5. Install the coolant expansion tank closure cap.
  6. Install the spark plugs. Refer to Spark Plug Replacement .
  7. Install the engine management wiring harness to the intake manifold, cylinder head cover and engine wiring harness bracket.
  8. Install the timing belt upper front cover. Refer to Timing Belt Upper Front Cover Replacement .
  9. Raise the vehicle.
  10. Install the front wheelhouse liner Inner front extension. Refer to Front Wheelhouse Liner Inner Front Extension Replacement (Left SIde) , Front Wheelhouse Liner Inner Front Extension Replacement (Right SIde, LWE, LUW) .
  11. Lower the vehicle.
scientia non olet · About LEMON Manuals