Catalytic Converter Heat Shield Replacement (LAU)

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Catalytic Converter Heat Shield (LAU)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the battery tray. Refer to Battery Tray Replacement . Remove the radiator surge tank engine hose at the surge tank. Refer to Radiator Surge Tank Engine Hose Replacement (LAU) . Remove the radiator surge tank inlet hose at the surge tank. Refer to Radiator Surge Tank Inlet Hose Replacement (LF1) or Radiator Surge Tank Inlet Hose Replacement (LAU) .
1	Catalytic Converter Heat Shield Nut WARNING: Refer to Hot Exhaust System Warning . CAUTION: Refer to Fastener Caution . Tighten: 10 N.m (7 lb ft)
2	Catalytic Converter Heat Shield Bolt (Qty: 3) Tighten: 10 N.m (7 lb ft)
3	Catalytic Converter Heat Shield