Engine Mount Bracket Replacement - Right Side

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Mount Bracket - Right Side

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (LF1) or Air Cleaner Assembly Replacement (LAU) . Remove engine mount. Refer to Engine Mount Replacement - Right Side .
1	Engine Mount Bracket Fastener (Qty: 3) CAUTION: Refer to Fastener Caution . Procedure: Remove the A/C pipe bracket nut and reposition pipe to access front mount bracket fastener. Tighten: 100 N.m (74 lb ft)
2	Engine Mount Bracket Procedure: Transfer components as necessary.

Callout

Component Name

Preliminary Procedures

Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (LF1) or Air Cleaner Assembly Replacement (LAU) .
Remove engine mount. Refer to Engine Mount Replacement - Right Side .

Engine Mount Bracket Fastener (Qty: 3)

CAUTION: Refer to Fastener Caution .

Procedure:
Remove the A/C pipe bracket nut and reposition pipe to access front mount bracket fastener.

Tighten: 100 N.m (74 lb ft)

Engine Mount Bracket
Procedure:
Transfer components as necessary.