Radiator Outlet Pipe Replacement (LAU)

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Radiator Outlet Pipe (LAU)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Drain the coolant system. Refer to Cooling System Draining and Filling (Static Fill LF1) or Cooling System Draining and Filling - Vac-N-Fill (GE 47716) or Cooling System Draining and Filling (Static Fill LAU) . Remove the battery tray support. Refer to Battery Tray Support Replacement . Remove the engine oil cooler outlet hose. Refer to Engine Oil Cooler Outlet Hose Replacement (LAU) . Remove the radiator outlet hose. Refer to Radiator Outlet Hose Replacement (LF1) or Radiator Outlet Hose Replacement (LAU) . Remove the transmission heat shield. Refer to Transmission Heat Shield Replacement (LAU) .
1	Radiator Outlet Pipe Retainer Bolt CAUTION: Refer to Fastener Caution . Tighten: 10 N.m (7 lb ft)
2	Seal
3	Radiator Outlet Pipe Bolt Tighten: 9 N.m (6 lb ft)
4	Radiator Outlet Pipe