Engine Oil Cooler Outlet Hose Replacement (LAU)

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Engine Oil Cooler Outlet Hose (LAU)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill LF1) or Cooling System Draining and Filling - Vac-N-Fill (GE 47716) or Cooling System Draining and Filling (Static Fill LAU) Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Reposition the auxiliary water pump. Refer to Auxiliary Water Pump Replacement (LAU) Remove the secondary air injection pump. Refer to Secondary Air Injection Pump Replacement
1	Engine Oil Cooler Outlet Hose Clamps (Qty 2) Procedure: Disengage tension on the engine oil cooler outlet hose clamps using BO-38185: Hose Clamp Pliers. Special Tools: BO-38185: Hose Clamp Pliers For equivalent regional tools, Refer to Special Tools
2	Engine Oil Cooler Outlet Hose

Callout

Component Name

Preliminary Procedures

Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill LF1) or Cooling System Draining and Filling - Vac-N-Fill (GE 47716) or Cooling System Draining and Filling (Static Fill LAU)
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
Reposition the auxiliary water pump. Refer to Auxiliary Water Pump Replacement (LAU)
Remove the secondary air injection pump. Refer to Secondary Air Injection Pump Replacement

Engine Oil Cooler Outlet Hose Clamps (Qty 2)
Procedure:
Disengage tension on the engine oil cooler outlet hose clamps using BO-38185: Hose Clamp Pliers.
Special Tools:
BO-38185: Hose Clamp Pliers
For equivalent regional tools, Refer to Special Tools

Engine Oil Cooler Outlet Hose