LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 228 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Front Seat Riser Finish Cover Replacement

Front Seat Riser Finish Cover Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Seat Riser Finish Cover
GM1950031Courtesy of GENERAL MOTORS CORP.
Front Seat Riser Finish Cover Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the front seat cushion outer trim panel. Refer to Front Seat Cushion Outer Trim Panel Replacement (with HP2) , Front Seat Cushion Outer Trim Panel Replacement (Manual Seat without HP2) , Front Seat Cushion Outer Trim Panel Replacement (Power Seat without HP2) .
  2. Remove the front cushion inner trim panel. Refer to Front Seat Cushion Inner Trim Panel Replacement (without HP2) , Front Seat Cushion Inner Trim Panel Replacement (with HP2) .
1 Front Seat Riser Rear Finish Panel
Procedure 
Pull rearward to disengage the retainers.
scientia non olet · About LEMON Manuals